How To Install Esxi On Dell Poweredge

Dell EMC Ready Compages for VMware Telco Cloud Platform ane.0

Using iDRAC9 to install ESXi on PowerEdge R640, R740, and R740xd servers

Using iDRAC9 to install ESXi on PowerEdge R640, R740, and R740xd servers

Thanks for your feedback!

• The creation of a TCP infrastructure requires the installation of ESXi on the PowerEdge R640 / PowerEdge R740 , and PowerEdge R740xd  servers based on the vSAN Prepare Node.

  • Verify that the minimum required hardware firmware versions are installed on the servers, as described in Tabular array ii
  • ESXi Installer 6.7 U3 or afterward ISO file
  • iDRAC with at least 16 GB SD card enabled

  Encounter the ESXi installation on deployment server department to install the ESXi on Dell EMC PowerEdge R640/R740 and R720xd servers.

  Once the ESXi is installed on the PowerEdge R640, PowerEdge R740, and PowerEdge R740xd servers, see Customize ESXi and its subsection to configure the ESXi password, update direction network configuration, and to modify the IPv4 and DNS configuration.

  To:

  • Add together a VLAN ID to the ESXI management network, run across Ready VLAN ID for ESXi management network
  • Assign licenses to ESXi, run into Assign ESXi license
  • Create SSH policies, run across Set SSH policy
  • Create firewall rules, encounter Set Firewall rules
  • Install the DPDK drivers, meet Install DPDK drivers

  Set VLAN ID for ESXi direction network

  To set the VLAN ID for the ESXi management network, perform the following steps.

  1. From the System Customization window, select Configure Management Network, select VLAN, and printing Enter.
  2. In the field provided, enter the configured VLAN ID then press Enter to save the change.

  Assign ESXi license

  To assign a license to ESXi hosts, perform the following steps.

  1. From a web browser, open up the ESXi, click Manage, and then select Licensing.
  2. In the License key field, enter the required license key then click Cheque license.
  3. Click Assign license so click Close.

  Ready SSH policy

  To gear up the SSH policy for each ESXi host, perform the following steps.

  1. Use the IP accost or domain name to go to the ESXi embedded host client.
  2. From the left navigation panel, select Manage to access the settings for your host.
  3. Select the Services tab and then select the TSM-SSH service (SSH).
  4. Right-click the service name or click to select the Actions carte item to ready the Policy to Beginning and stop with host.

  Gear up firewall rules

  To set the firewall rules for ESXi hosts, perform the following steps.

  1. SSH to the ESXi host.
  2. When prompted, enter the required credentials.
  3. Run the post-obit control to disable the firewall rule:

     esxcli network firewall set --enabled false

  4. To go the status, run the following command:

     esxcli network firewall get

  Install DPDK drivers

  • Download the updated NIC driver from the VMware Compatibility Guide in either VIB or offline bundle format
  • Verify that the resource ESXi hosts are in maintenance manner

  On the resource pod, install the necessary drivers for the Intel 25G 2P XXC740/10G X710 NIC cards. The installation of the drivers is required on each of the ESXi hosts that employ N-VDS Enhanced mode.

  Note: QLogic drivers practise not support the N-VDS Enhanced mode characteristic.

  1. Copy the downloaded VIB or offline parcel file to the  /tmp/ directory in the ESXi server.
  2. Using the SSH terminal, run the post-obit control:
     • If you are using the VIB file to install the commuter, run: esxcli software vib install -v {VIBFILE path}
     • If y'all are using an offline parcel to install the driver, run: esxcli software vib install -d {OFFLINE_BUNDLE path}

     Note: Enter the consummate path of VIB or offline bundle path of the ESXi server in place of {VIBFILE path} and {OFFLINE_BUNDLE path}. For example, esxcli software vib install -v /tmp/VMware_bootbank_net-driver.1.1.0-1vmw.0.0.372183.vib

     Installation of the driver begins.

  3. Afterwards the installation of the driver is consummate, reboot the host.
  4.  Verify the VMware installation bundle (VIB) versions that are installed on the resource pod hosts.

     Figure 22.Installed DPDK drivers

     

  5. Update the VMware NIC drivers. Refer the Operations Guide to update.

     Note: If y'all are using Qlogic NICs, add and set the ESXi hosts/Concrete NICs to Motorcar-negotiations.

Source: https://infohub.delltechnologies.com/l/dell-emc-ready-architecture-for-vmware-telco-cloud-platform-1-0/using-idrac9-to-install-esxi-on-poweredge-r640-r740-and-r740xd-servers

Posted by: murphycalat1937.blogspot.com

Share this post